The SERVOIO-LCC is an LCC/OpenLCB node with up to 16 channels, each of which can be individually configured as an input or output.
Inputs can be a simple switch/button, or be driven other hardware, (e.g. for block detection).
Outputs can directly drive LEDs and servos. With the optional high current drivers, outpus can drive relays and other loads up to 500 mA.
Inputs can detect on, off or toggled states with configurable polarity
Outputs can be configured to turn on, off or toggle with, configurable polarity, steady state or configurable delays
The SERVOIO-LCC monitors it's own activity, allowing actions to be cascaded, e.g., for controlling multiple points/turnouts in a yard throat from a single event
You can use the SERVOIO-LCC to get information from sensors, such as block detection etc. into your LCC network, and drive actuators, such as servos and relays, from your LCC network.
Related Products
USB-LCC
Use a USB-LCC to interface your LCC/OpenLCB network to a WIndows, Linux or MacOS computer running JM..
£45.00 Ex Tax: £37.50
TERM-LCC
Sold in a pack of two, bus terminators are required at each end of your LCC/OpenLCB CAN bus to ensur..
£15.00 Ex Tax: £12.50
POWER-LCC
POWER-LCC is a power injection module for LCC and OpenLCB networks. A 12V 1 Amp input is split into..
£16.20 Ex Tax: £13.50
BUTTONLED
The BUTTONLED is a simple test board with eight switches and eight LEDS. Use the BUTTONLED during d..
£15.00 Ex Tax: £12.50
PI-LCC
Use a PI-LCC to interface your LCC/OpenLCB network to a Raspberry-Pi computer running JMRI. Galvani..
£45.00 Ex Tax: £37.50
SBOOST-LCC
Coming Soon! LCC connected DCC booster for LCC and OpenLCB layout control. 2.5 A DCC booster. ..
£0.00 Ex Tax: £0.00
LCC Starter Kit
Starter kit for LCC/openLCB containing everything you need to get started with LCC or OpenLCB. SERV..
£144.00 Ex Tax: £120.00
IO-LCC
The IO-LCC is an LCC/OpenLCB node with up to 16 channels, each of which can be individually configur..
£54.00 Ex Tax: £45.00
Tags: LCC OpenLCB, Servo Input Output